Mobile pump extension for pressurized water pumps and gear pumps.

Turns a normally stationary pump into an additional mobile variant.
You can order this option for your purchased pump. We mount the pump ready for use on this extension and make all electrical connections.

This plate may e.g. with thumbscrews mounted on the ground, so you can remove the complete unit in a few easy steps for mobile use.

• Base plate made of aluminum, dimensions 210x145mmx5mm.
• Screws (stainless steel) completely sunk on the underside.
• Massive spiral cord, maximum length 3m.
• Power plug with integrated fuse 16A, suitable for cigarette lighter or standard sockets.
• Strain relief for power connection.
• 4 mounting holes at the corners, diameter 6mm.

The pump on the pictured is not included and must be purchased separately. View serves the exemplary presentation.

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

This pump has an electronic control. It switches off at the maximum pressure and when the pressure in the line drops, the pump starts again. Furthermore, the engine speed varies variable, depending on the requested performance.

•     Quiet operation
•     Voltage 12V DC and 24V DC
•     Pressure up to 2.5bar
•     Flow rate 15L per minute
•     Suction height 1.5m
•     Connections: Grommet for 13mm (½ ") hose and 3/8" threaded connection
•     Pump guard strainer included
•     Power consumption up to max. 15A
•     Weight: 2kg
•     Dimensions: 172mm long, 186mm wide, 101mm high (including mounted anti-pump screen)

Gear pump with a pressure up to 4bar, 12V and up 10 L/min. Gear wheels in PEEK, stainless steel spindle.

In contrast to conventional pressure water pumps, these pumps do not switch off when the line is closed, which is why they are ideal for use as a filling pump.
 

•     Quiet operation
•     Voltage 12V DC (24V version also available)
•     Pressure up to 4bar
•     Flow rate 10L per minute
•     Suction height 1.5m
•     Connections: Grommet for 13mm (½ ") hose and 3/8" threaded connection
•     Pump guard strainer included
•     Power consumption up to max. 12.5A
•     Weight: 1.8kg
•     Dimensions: 167mm long, 166mm wide, 101mm high (including mounted anti-pump screen)

Thanks to its high pressure, this pump is a good choice in combination with our new filter systems , which are designed for pressures up to 8 bar.
It has very small dimensions and produces a quiet whirring noise during operation.

In contrast to conventional pressure water pumps, these pumps do not switch off when the line is closed, which is why they are ideal for use as a filling pump.
 

•     Quiet operation
•     Voltage 12V DC (24V version also available)
•     Pressure up to 7bar
•     Flow rate 18L per minute
•     Suction height 3m
•     Connections: Grommet for 13mm (½ ") hose and 3/8" threaded connection
•     Pump guard strainer included
•     Power consumption up to max. 25A
•     Weight: 3.8kg
•     Dimensions: 217mm long, 168mm wide, 109mm high (including mounted anti-pump screen)

Important: The pump requires a lot of power and therefore has to fit the battery concept of the installation. It is important to ensure a sufficient cable cross-section.
 

Thanks to its high pressure, this pump is a good choice in combination with our new filter systems , which are designed for pressures up to 8bar.
It has very small dimensions and produces a quiet whirring noise during operation.

In contrast to conventional pressure water pumps, these pumps do not switch off when the line is closed, which is why they are ideal for use as a filling pump.
 

•     Quiet operation
•     Voltage 24V DC (12V version also available)
•     Pressure up to 7bar
•     Flow rate 18L per minute
•     Suction height 3m
•     Connections: Grommet for 13mm (½ ") hose and 3/8" threaded connection
•     Pump guard strainer included
•     Power consumption up to max. 14A
•     Weight: 3.8kg
•     Dimensions: 217mm long, 168mm wide, 109mm high (including mounted anti-pump screen)

Important: The pump requires a lot of power and therefore has to fit the battery concept of the installation. It is important to ensure a sufficient cable cross-section.

Thanks to its high pressure, this pump is a good choice in combination with our new filter systems , which are designed for pressures up to 8 bar.
It has very small dimensions and produces a quiet whirring noise during operation.

This pump has an electronic control. It switches off at the maximum pressure and when the pressure in the line drops, the pump starts again. Furthermore, the engine speed varies variable, depending on the requested performance.

•     Quiet operation
•     Voltage 12V DC and 24V DC
•     Pressure up to 6bar
•     Flow rate 18L per minute
•     Suction height 3m
•     Connections: Grommet for 13mm (½ ") hose and 3/8" threaded connection
•     Pump guard strainer included
•     Power consumption up to max. 25A
•     Weight: 4.3kg
•     Dimensions: 240mm long, 193mm wide, 109mm high (including mounted anti-pump screen)

Important: The pump requires a lot of power and therefore has to fit the battery concept of the installation. It is important to ensure a sufficient cable cross-section.
 

Ejector pump in industrial quaility with a pressure up to 8bar, 230V and up to 50 L / min. Housing and impeller made of stainless steel! Suction height up to 8m.

Thanks to its high pressure, this pump is a good choice in combination with our new filter systems, which are designed for pressures up to 8 bar.
Compared to the Kärcher pump, it is whisper quiet and requires very little power.

In contrast to conventional pressure water pumps, these pumps do not switch off when the line is closed, which is why they are ideal for use as a filling pump.
 

•    Quiet operation
•    Voltage 220 - 240V AC
•    Pressure up to 8bar
•    Flow rate up to 50L per minute
•    Suction height 8m
•    Zero head up to 31m
•    Pump, seal housing and impeller made of stainless steel
•    Suitable for continuous operation
•    Connections: Suction hose: 1 1/4 ", Output hose: 1"
•    Pump can be operated mobile and permanently installed
•    Handle can be removed with 2 screws
•    Power consumption only 370 watts
•    Mounted power cable and integrated switch
•    Protection IP55
•    Weight: 11.5kg
•    Dimensions: 366mm long, 215mm wide, 224mm high (without handle, with handle height 275mm)

Accessories: We deliver the pump "naked", i. without suction hoses and outlet hoses, as well as in 2 different plug and play versions. With these variants, everything is already included and assembled, what you need for immediate use. Connect, priming housing and suction hose, switch on pump, done.
We supply the variants either with a 5m or 10m long, fully transparent PVC suction hose with integrated spring steel spiral and smooth inner wall so that it is easy to see what is happening in the hose, e.g. where the water column is, if there are still bubbles etc.
The suction hose has a foot valve that prevents backflow of the sucked water and also provides a float, with which the suction basket is kept below the surface and thus no large amounts of sediment are sucked from the bottom of the water.
The outlet hose to the filter (3/4 ") is 3m and can be extended as desired.

Thanks to its high suction power and pressure, the pump offers ideal conditions for comfortable garden irrigation from rainwater cisterns or cisterns.
The built-in thermal fuse reliably protects the pump from overheating and guarantees maximum safety.
The BP 4 pump with 3.5 m vacuum-tight spiral hose with filter and check valve (G1 "connection thread, 3/4" diameter) allows the immediate use of the robust, lightweight pump which can be easily transported thanks to the ergonomic handle.
Kärcher garden pumps are strong, maintenance-free and can be connected without tools.
They can also be switched on and off comfortably by a foot switch.
The materials used are very high quality and and the basis for a long life.
A warranty extension of five years is possible.
The pump can be equipped with an electronic start / stop function by means of an electronic pressure switch.

• Motor power max. (W) 1000
• Flow rate max. (L / h) 4000
• Delivery height / pressure max. (M) 45 / 4.5
• Suction height (m) 8
• Delivery temperature max. (° C) 35
• Size and / or weight: 22 x 40,5 x 26 cm; 9 Kg
• Product weight incl. Packing: 11 Kg